Siemens Simatic S7-400

Warranty, Liability and Support
Time switch based on the S7-300/400 CPUs with simple HMI system
including radio-controlled clock connection
Rev. B - final 19.07.2002 21/84
Copyright © Siemens AG Fehler! Unbekannter Name für
Dokument-Eigenschaft. All rights reserved
BID21669756_Zeitschaltuhr_einfach_DOKU_v20_e.doc
2.3 Standard components required
2.3.1 Hardware components
The following hardware components are required to use the application.
Table 2-1 Hardware components required
Component MLFB Description
PS 307 6ES7307-1BA00-0AA0 or similar power supply
CPU 315-2 DP 6ES7-315-2AG10-0AB0 or similar CPU
PG740 PIII or equal PC
OP3
or alternative
TP170A
6AV3 503-1DB10
6AV6 545-0BA15-2AX0
or similar HMI system
Optional hardware components (required only when radio-controlled clock
is to be used) :
Tabelle 2-2 Optional hardware components
Component MLFB Description
SM 321 6ES7 321-7BH00-0AB0
or similar digital input
module
Radio receiver SIPLUS
DCF77
6AG1057-1AA03-0AA0
or SICLOCK (see
appendix)
2.3.2 Software components
The following software components are required to implement our example.
Table 2-3 Software components required
Component MLFB Description
STEP7 V5.2 6ES7810-4CC06-0YX0
ProTool V6.0 6AV6582-2BX06-0XA0
Windows NT 4.0 SP 6a
or alternative
Windows 2000 SP 2