Time switch based on the S7-300/400 CPUs with simple HMI system
including radio-controlled clock connection
Rev. B - final 19.07.2002 25/84
Copyright © Siemens AG 2005 All rights reserved
BID21669756_Zeitschaltuhr_einfach_DOKU_v20_e.doc
2.5 Installation with simple setup
The entire application software available for downloading has been
compressed in the “timefunc.exe” file. Copy the “timefunctions.exe“ file to a
separate folder and launch by double clicking on it. The project is
automatically extracted into the specified path including all respective sub-
directories. Subsequently the extracted STEP7 project can be opened with
the SIMATIC Manager.
S7 project name
OP3-
TP170A project
Fig. 2-11 SIMATIC Manager
The project contains both ProTool projects for OP3 and TP170A. They can
be opened by double click in the SIMATIC Manager, providing ProTool has
been installed on the computer.
The hardware components for the S7 station may have to be adjusted in
the STEP7 project (if you are using different hardware components from
those given here) and is then be loaded into the S7 CPU.
To Next Page
Loading...
