Siemens Simatic S7-400 - Page 50

Time switch based on the S7-300/400 CPUs with simple HMI system
including radio-controlled clock connection
Rev. B - final 19.07.2002 50/84
Copyright © Siemens AG 2005 All rights reserved
BID21669756_Zeitschaltuhr_einfach_DOKU_v20_e.doc
Step Action Screenshot
3.
In the options box "Zugangspunkt
der Applikation" [Interface
Parameter Assignment Used] select
“CP5611(MPI)“. Click
“Eigenschaften”
[Properties...].
4.
Enter the MPI address for the PC, in
this example the address “4“. Enter
the other bus parameters and close
the dialog with “OK“.
5.
Quit the dialog “PG/PC-
Schnittstelle einstellen“
[Set PG/PC Interface] by
pressing “OK“.