Siemens SIMODRIVE 611-D Diagnostics Guide

04/96

Siemens AG 2001 All rights reserved 6FC5198–jAB40
1–176
SINUMERIK 840C / SIMODRIVE 611–D (DA)
165059 Check input new SI password different OK softkey
Softkey ”Change password”
The password has not been changed
The new password must be entered again in the third field to ensure that it has been entered correctly.
Repeat input.
Applies as from SW 5.4
165060 Rated power too small (MD x130 v 0) OK softkey
Softkey ”Calculate equivalent circuit diagram data (MSD only)”
The equivalent circuit diagram data have not been changed.
The rated power (in MD 1130 and MD 2130) must not be  0.
Correct value, repeat function.
Applies as from SW 5.4
165061 Rated voltage too small (MD x132 v 0) OK softkey
Softkey ”Calculate equivalent circuit diagram data (MSD only)”
The equivalent circuit diagram data have not been changed.
The rated voltage (in MD 1132 and MD 2123) must not be  0.
Correct value, repeat function.
Applies as from SW 5.4
165062 Rated current too small (MD x103 v 0) OK softkey
Softkey ”Calculate equivalent circuit diagram data (MSD only)”
The equivalent circuit diagram data have not been changed.
The rated current (in MD 1103 and MD 2103) must not be  0.
Correct value, repeat function.
Applies as from SW 5.4
165063 Cos Phi power factor wrong OK softkey
Softkey ”Calculate equivalent circuit diagram data (MSD only)”
The equivalent circuit diagram data have not been changed.
The Cos Phi power factor (in MD 1129 and MD 2129) must not be  0 and must not exceed 0.996.
Correct value, repeat function.
Applies as from SW 5.4
165064 Pole pair no. (ratio MD x134/MD x400) illegal OK softkey
Softkey ”Calculate equivalent circuit diagram data (MSD only)”
The equivalent circuit diagram data have not been changed.
The pole pair no. (ratio rated frequency (MD 1134 and MD 2134) /rated speed (MD 1400 and MD 2400)) is illegal.
Correct value, repeat function.
Applies as from SW 5.4
Scan
Effect
Explanation
Remedy
Note
Scan
Effect
Explanation
Remedy
Note
Scan
Effect
Explanation
Remedy
Note
Scan
Effect
Explanation
Remedy
Note
Scan
Effect
Explanation
Remedy
Note
Scan
Effect
Explanation
Remedy
Note
1 Alarms
1.5.1 Alarm description

Siemens SIMODRIVE 611-D Specifications

General

Brand	Siemens
Model	SIMODRIVE 611-D
Category	Control Unit
Language	English