Siemens SIMOTICS 1FT2104-4AF - 7 Preparation for Use; Transporting

1FT2 synchronous motors for SINAMICS S120
Configuration Manual, 03/2021, A5E50645584B AA
109
Preparation for use
7
7.1 Transporting
Note
Comply with the local national regulations for the transportation of motors.
Precondition
• Use suitable load suspension devices when transporting and installing the motor.
• Do not lift the motor by the connector.
• Transport the motor carefully.
Procedure
Lifting and transporting with lifting slings
You can lift and transport the motor using lifting slings.
WARNING
Incorrectly dimensioned or incorrectly used lifting slings
If lifting slings are incorrectly dimensioned or incorrectly used, the motor can fall and cause
death, severe injury and/or damage to property.
• Only use lifting slings that are suitable for the weight of the motor.
• Attach the lifting slings as shown in the figure "Lifting and transporting with lifting
slings".
Figure 7-1 Lifting and transporting with lifting slings (example diagram)