Technical data and characteristics
6.2 Motor overview/Motor Module assignment/power cables
1FT2 synchronous motors for SINAMICS S120
Configuration Manual, 03/2021, A5E50645584B AA
77
MOTION-CONNECT power cables for 1FT2
Example of an article number for a MOTION-CONNECT power cable
Position in the article number
MOTION-CONNECT power cable (ex-
ample)
MOTION-CONNECT power cable between the motor and the SINAMICS S120 Motor
Module/Power Module
You can find the suitable MOTION-CONNECT power cable in the following table.
Motor vari-
ant
Applicable
Motor Module/
Power Module
Plug connector size/
SPEED-CONNECT connector Fully threaded connector
1FT2☐04
1FT2☐05
M17 / 4 x 1.5
1FT2☐08
1FT2☐10-3
1FT2☐10-4
M23 / 4 x 1.5
Cable without brake cores
Cable with brake cores (can also be used for motors without brake)
Additional information on the length code is available in Chapter "MOTION-CONNECT
connection systems" of Catalog NC 82
(https://support.industry.siemens.com/cs/ww/en/view/109746977).