To illustrate possible application areas for our products, typical use cases are listed in this product
documentation and in the online help. These are purely exemplary and do not constitute a
statement on the suitability of the respective product for applications in specic individual cases.
Unless explicitly contractually agreed, Siemens assumes no liability for such suitability.
Suitability for a particular application in specic individual cases must be assessed by the user,
taking into account all technical, legal, and other requirements on a case-by-case basis. Always
observe the descriptions of the technical properties and the relevant constraints of the
respective product contained in the product documentation.
Information regarding third-party products
Note
Recommendation relating to third-party products
This document contains recommendations relating to third-party products. Siemens accepts the
fundamental suitability of these third-party products.
You can use equivalent products from other manufacturers.
Siemens does not accept any warranty for the properties of third-party products.
1.2.2 Target group
Description
These operating instructions are intended for:
• Fitters
• Commissioning engineers
• Machine operators
• Service and maintenance personnel
• Warehouse personnel
• Personnel decommissioning the motor
• Personnel disposing of the motor
1.2.3 Avoiding dangers
Description
Avoid dangers. Ensure safe, problem-free operation and a maximum service life:
• Before you start using the motor, you must read these Operating Instructions.
• Always follow the safety instructions and notices in these operating instructions.
Introduction
1.2About this manual
1FW6 built-in torque motors
8 Operating Instructions, 09/2022, A5E52220812B AA
To Next Page
Loading...
Need help?
General