Disposal
11.3 Preparing for disassembly
1MB..5/6 shaft height 71 ... 355
138 Operating Instructions, 07/2020, A5E41926185A
11.3 Preparing for disassembly
Disassembly of the machine must be carried out and/or supervised by qualified personnel
with appropriate expert knowledge.
1. Contact a certified waste disposal organization in your vicinity. Clarify what is expected in
terms of the quality of dismantling the machine and provision of the components.
2. Carefully follow the 5 safety rules (Page 11).
3. Disconnect all electrical connections and remove all cables.
4. Remove all liquids such as oil and cooling liquids. Collect the liquids separately and dispose
of them in a professional manner.
5. Detach the machine fixings.
6. Transport the machine to a suitable location for disassembly.
11.4 Dismantling the machine
Dismantle the machine using the general procedures commonly used in mechanical
engineering.
The machine is made up of heavy parts. These parts are liable to fall during dismantling.
This can result in death, serious injury or material damage.
Before you release any machine parts, secure them so that they cannot fall.
To Next Page
Loading...
