Preparations for use
4.5 Transport and storage
1MB..5/6 shaft height 71 ... 355
Operating Instructions, 07/2020, A5E41926185A
39
Alternative rotor bracing
• If you transport the machine after the output element has been pulled on, then you must
axially fix the rotor in another way.
Figure 4-1 Axial fastening of the rotor
Thread in the shaft extension
Tightening torques for other rotor shipping brace types
• The thread in the shaft extension indicates the rotor weight. This indirectly specifies the
required preload force when axially fastening the rotor.
Thread in the shaft extension
Axial preload force for other rotor shipping brace types
Storing the rotor locking device
Store the rotor locking device in a safe place. It must be remounted if the machine is removed
and shipped on further.
To Next Page
Loading...
