© Siemens AG 2003 All Rights Reserved
SIMOTION Safety Unit (AP) - Edition 06.2003
2-11
2 Operating modes
2.1 Selecting the operating mode
Definition
Up to 6 operating modes can be parameterized.
A "1 of 6" selection indicates the presence of a short circuit and a faulty multiple
selection of operating modes. The use of test voltages, i.e. the selection of clocking
via the internal sensor supply, is therefore not required for the mode selector.
Parameterization
The assignment of the connection terminals to the operating mode is shown in
Figure 2-1, left section.
Figure 2-1 Operating modes
2
To Next Page
Loading...
Need help?
General
