© Siemens AG 2003 All Rights Reserved
SIMOTION Safety Unit (AP) - Edition 06.2003
9-67
9 Operating and fault messages
Table 9-1 System errors
Display Error description Corrective
measure
F001 Error in internal CPU RAM See 1)
F002 RAM error See 1)
F003 EPROM error See 1)
F004 Data error in dual port RAM See 1)
F005 Data error in memory card or memory card empty See 1)
F006 Dissimilar FW versions See 1)
F007 Internal synchronization error See 1)
F008 Watchdog has responded See 1)
F009 Undervoltage error in 5V supply See 1)
F010 ODIS signal error See 1)
F011 PLD error See 1)
F012 Subsystem ID error See 1)
F013 Error from plug-in monitor for memory card See 1)
F014 Keyswitch error See 1)
F015 CPU error See 1)
F016 System data error See 1)
F017 Program execution error See 1)
F018 Application error See 1)
F019 Serial interface error See 1)
F020 Error, input X4.1 See 2)
F021 Error, input X4.2 See 2)
F022 Error, input X4.3 See 2)
F023 Error, input X4.4 See 2)
F024 Error, input X4.5 See 2)
F025 Error, input X4.6 See 2)
F026 Error, input X4.7 See 2)
F027 Error, input X4.8 See 2)
F028 Error, input X4.9 See 2)
F029 Error, input X4.10 See 2)
F030 Error, input X4.11 See 2)
F031 Error, input X4.12 See 2)
F032 Error, input X4.13 See 2)
F033 Error, input X4.14 See 2)
F034 Error, input X4.15 See 2)
F035 Error, input X4.16 See 2)
F036 – F039
Not assigned
-
F040 Error, input X3.1 See 2)
F041 Error, input X3.2 See 2)
9
To Next Page
Loading...
Need help?
General
