© Siemens AG 2003 All Rights Reserved
SIMOTION Safety Unit (AP) - Edition 06.2003
7-51
7 Procedural functions of press brakes
7.1 Selecting the operating mode
• Up to 6 operating modes can be parameterized.
• For press brakes, operating modes 1-6 are equivalent and have no special
functions.
• The only exception is operating mode 1, which is intended for fault
acknowledgement.
7.2 Protective features
The protective features (EMERGENCY OFF, EMERGENCY OFF output signal,
safety guard, safety gate, engaging lock) do not require special handling for the
folding functionality.
7.3 Control elements
The control elements (two-hand control, foot switch, acknowledge button for group
acknowledgement) do not require special handling for the folding functionality.
7
To Next Page
Loading...
Need help?
General
