3.2 Safety Information
WARNING
Danger to life due to fire if overheating occurs because of insufficient ventilation clearances
Inadequate ventilation clearances can cause overheating of components followed by fire and
smoke development. This can cause death or serious injury. This can also result in increased
downtime and reduced service life for devices/systems.
ā It is essential that you maintain 50 mm ventilation clearances above and below the
component.
Terminal Module TM17 High Feature
3.2 Safety Information
TM15 / TM17 High Feature Terminal Modules
36 Manual, 11/2016
To Next Page
Loading...
