Siemens SINAMICS BOP-2 - Monitoring; Monitor Menu Overview; Monitoring Screen Details

Basic Operator Panel 2 (BOP-2)
Operating Instructions, 02/2016, A5E37143404B AA
21
Monitoring
6
Overview
The Monitor menu allows the user to easily access a variety of screens which display the
actual status of the system.
The menu is selected by using the
and
keys to move
the menu bar to the r
equired menu.
Pressing
will confirm the selection and display the top
level menu.
Use the
and keys to scroll through the various
screens.
The information displayed in the Monitoring screens is read-only and cannot be modified.
Monitoring screen information
The details of the information displayed by the various monitoring screens are described
below.
The default screen shows the value set for the setpoint, below
this value the actual speed of the motor
is displayed.
The voltage output screen displays the actual voltage output
from the Inverter that is being supplied to the connected
m
otor.
The DC Link screen displays the actual DC Link voltage DC.