Siemens SINAMICS BOP-2 - Fault and Alarm Management

Diagnostics
Basic Operator Panel 2 (BOP-2)
28 Operating Instructions, 02/2016, A5E37143404B AA
Image 8-2 Active faults and alarms sequence
Note
Dynamic fault screen
If a fault occurs, the dynamic fault screen is automatically displayed.
History
The History option within the Diagnostics menu maintains a list of the last 64 faults that have
occurred within the Inverter/motor system. For a detailed explanation of the displayed fault
and alarm numbers, please refer to the relevant Parameter List.
Pressing
for more than 3 seconds returns the BOP-2 display to the status screen.
To access the faults and alarm list, the actions shown in the following figure should be
performed:
Image 8-3 History list sequence