Control
Basic Operator Panel 2 (BOP-2)
26 Operating Instructions, 02/2016, A5E37143404B AA
Note
Reverse function
When the JOG function is activate; pressing
and simultaneously for more than 3
seconds toggles the REVERSE function.
The Reverse function, when selected, will allow the motor to be manually rotated in the
reverse direction from its normal forward motion with each press of
. If is pressed
continuously, the motor will rotate continuously in reverse until
is released.
To enable or disable the Reverse function, the actions shown in the following figure should
be performed:
Image 7-4 Reverse function
To Next Page
Loading...
