Diagnostics
Basic Operator Panel 2 (BOP-2)
Operating Instructions, 02/2016, A5E37143404B AA
29
The Status option displays the actual state of the control words and status words that are
used to control and monitor various functions of the Inverter. Information regarding the
control words and the status words can help diagnose problems with the Inverter.
The status option displays the current state of the following control and status words:
● Control word 1
● Control word 2
● Status word 1
● Status word 2
The various screens displayed in this menu option are read-only and cannot be modified.
Pressing
for more than 3 seconds returns the BOP-2 display to the status screen.
To access the Status screens, the actions shown in the following figure should be performed:
Image 8-4 Status Word sequence
To Next Page
Loading...
