Siemens SINAMICS G120C - Page 71

Commissioning
4.2 Commissioning with BOP-2 operator panel
SINAMICS G120C, FSD ... FSF inverters
Compact Operating Instructions, 11/2016, FW V4.7 SP6, A5E39339884B AA
71
No.
Description
p3233
Torque actual value filter time constant [ms]
p3320 Fluid flow machine P = f(n), Y coordinate: P flow
1%, point 1
p3321 Fluid flow machine P = f(n), X coordinate: n flow
1%, point 1
p3322
P = f(n), Y coordinate: P flow 2%, point 2
p3323
P = f(n), X coordinate: n flow 2%, point 2
…
…
p3328
P = f(n), Y coordinate: P flow 5%, point 5
p3329
P = f(n), X coordinate: n flow 5%, point 5
p3330
BI: 2-3 wire control 1
p3331
BI: 2-3 wire control 2
p3332
BI: 2-3 wire control 3
r3333
CO/BO: 2-3 wire output
.00
2-3 wire ON
.01
2-3 wire reverse
.02
2-3 wire ON / invert
.03
2-3 wire reverse/invert
p3820
Friction characteristic, value n0
p3821
Friction characteristic, value n1
…
…
p3829
Friction characteristic, value n9
p3830
Friction characteristic, value M0
p3831
Friction characteristic, value M1
…
…
p3839
Friction characteristic, value M9
r3840
CO/BO: Friction characteristic status word
.00 1 = Friction
characteristic
OK
.01 1 = Recording of the
friction characteristic
activated
.02 1 = Recording
of the friction
characteristic
ended
.03 1 = Recording of the
friction characteristic
aborted
.08
1 = Friction characteristic positive direction
r3841
CO: Friction characteristic, output [Nm]
p3842
Activate friction characteristic
1
Friction characteristic active
No.
Description
p3845
Activate friction characteristic plot
0 Recording of friction characteristic plot de-
activated
1 Recording of friction characteristic in all
directions
2 Recording of friction characteristic in posi-
tive direction only
3 Recording of friction characteristic in nega-
tive direction only
p3846 Friction characteristic plot ramp-up/ramp-down
time [s]
p3847
Friction characteristic plot warm-up period [s]
p3856 Compound braking current [100 ≙ 100%]
r3859
CO/BO: Compound braking status word
p3900
Completion of quick commissioning
r3925
Identification final display
p3950
Service parameters
p3981
Faults, acknowledge drive object
p3985
Master control mode selection
r3996
Parameter write inhibit status
p5271
Online tuning controller configuration
p5310
Moment of inertia precontrol configuration
r5311
Moment of inertia precontrol status word
p5312
Moment of inertia precontrol linear positive [s²]
p5313 Moment of inertia precontrol constant positive
[kgms²]
p5314
Moment of inertia precontrol linear negative [s²]
p5315 Moment of inertia precontrol constant negative
[kgms²]
p5316 Moment of inertia precontrol change time mo
ment
of inertia [ms]
p5350
Mot_temp_mod 1/3 zero speed boost factor
r5389
CO/BO: Mot_temp status word faults/alarms
p5390
Mot_temp_mod 1/3 alarm threshold [°C]
p5391
Mot_temp_mod 1/3 fault threshold [°C]
r5397 Mot_temp_mod 3 ambient air temperature image
p0613 [°C]
r5398 Mot_temp_mod 3 alarm threshold image p5390
[°C]
r5399 Mot_temp_mod 3 fault threshold image p5391
[°C]