Siemens SINAMICS G120P - Page 31

Cooling tower fan (active temp. sensor) + hibernation mode
• Macro 106
• Control of the cooling tower fan based on the temperature of the cooling water
• Hibernation
• Temperature sensor 0 – 10V at AI0
• Flying restart and automatic restart are activated
DIP switch for AI0
and AI1 (terminals
3/4 and 10/11)
Fault
Output current (0..20 mA)
Operation
Alarm
Speed (0..20 mA)
PTC A / PTC B
ON / OFF
Temperature
sensor 0-10 V, e.g.
QAE2164.010
GND / DI COM
21
6 / 7