7
Converter SINAMICS G120P 08 – 23
1.1 Components Power Module 12
Control Unit 13
Operator Panel 2 (BOP-2/IOP-2) 14
1.2 Mounting and wiring Power Module 15
Control Unit 18
Wiring the control terminals in the CU230P-2 20
Wiring examples 21
Operator Panels (BOP-2/IOP-2) 22
Operator Panels BOP-2 and IOP-2 24 – 57
2.1 Basic functions The BOP-2 display 26
Menu structure 27
2.2 Working with BOP-2 Parameter list / Operating mode 28
Function buttons 31
2.3 Quick commissioning Resetting the converter 32
Setting the control mode / Selecting line frequency 33
Entering motor data 34
Specifying application parameters 35
Saving and restoring data 38
2.4 Intelligent Operator Panel The device 40
Working with IOP-2 41
Basic Commissioning 42
Output Settings 50
Trend View 52
Accessing diagnostics 56
STARTER software and PC 58 – 86
3.1 Mounting and preparation Creating a STARTER project 62
STARTER user interface 65
Loading converter data 66
3.2 Parameterization Configuration wizard 70
3.3 Application cases Activating emergency operation 75
Parameterization of the PID 76
Saving data 79
Restoring factory settings 82
Appendix Download overview 87
To Next Page
Loading...
