Siemens SINAMICS G120P - Page 88

76
STARTER software and PC: Application cases
Parameterizing the PID characteristic
Access “Technology controller” in the project tree
Select “Technology PID controller”
The PID controller opens in the work area
Start the parameterization by clicking on the blue binector button next to “PID controller activation”
A window with relevant parameter opens
Select 1 for activation and click OK
Define the setpoint source by clicking in the appropriate field
A window with relevant parameters opens
Choose P2201 for fixed value 1 and click OK
1
1
2
2
4
4
5
5
6
3
3