50
Operator Panels BOP-2 and IOP-2: Intelligent Operator Panel
Output settings
Two bar graphs with two different values can be
displayed on the status screen. Both graphs can be
changed so that other physical values are displayed.
An easy to use wizard guides you through the rele-
vant steps.
Navigating to the status-screen wizard
• Go to “Menu” and press OK
• Select “Extras” and confirm with OK
• Select “Status screen wizard”
OK OK
OK
Extras
Status screen wizard
Menu
Changing the top or bottom bar that is displayed
• Select “Bar graph” to change its values
• Press OK
• Select the screen position
• In our example: Select the top bar and press OK
OK OK
Bar graph Top
To Next Page
Loading...
