38
The Basic Operator Panel 2 can also be used to make a variety of other adjustments to your application.
Please note that an overview of the parameter numbers can be found in the Operating Instructions:
Control Units CU230P-2.
Saving parameter sets from the converter to the BOP-2
• Navigate with the menu bar to the function EXTRAS
• Press OK
• Push the DOWN button until TO BOP appears
• Press OK
Copying parameter sets from the BOP-2 to the converter
• Navigate to the menu EXTRAS
• Press OK
• Push the DOWN button until FROM BOP appears
• Press OK
• Disconnect from the line supply and reconnect, so that the download becomes effective
Saving and restoring data
Saving data in different location is important. The EXTRAS function allows loading parameter data from
the converter memory to the BOP-2 and vice versa.
The BOP-2 can be mounted or
removed at any time, even dur-
ing operation. The device is not
necessary for ongoing operation.
NOTE
Operator Panels BOP-2 and IOP-2: Quick commissioning
To Next Page
Loading...
