49
Saving settings
• Select “Save” and press OK
Save
OK
Saving
• The settings are saved to the EEPROM memory of the converter
• Please wait until the process has been completed
• Press OK to continue
OK
Completing basic commissioning
• The display reminds you that you have selected motor data identification
• Press OK to complete basic commissioning
• The status-screen is displayed
• At the top right a small warning symbol still reminds you that you have selected motor data
identification
• Switch on the motor
• Motor data identification is performed
OK
If “Cancel Wizard” is selected,
all changes will be cancelled and
the status screen will return to
the last set status screen settings.
After the motor data identifica-
tion has been performed, switch
the motor off and on again in
order to start normal operation
(using DI 0).
NOTE
During the motor data identification you will hear a peeping sound.
The identification process can take up to five minutes. After the motor
data identification has been completed your motor and converter are
configured.
To Next Page
Loading...
