57
If you want to find out about
previous faults and alarms,
please navigate back one level
and select “History”. This will dis-
play a list of all previous faults
and alarms including the time
that they occurred.
NOTE
Obtaining information on active faults
• Use the wheel to select “Menu”
• Confirm by pressing OK
• Choose “Diagnostics”
• Confirm by pressing OK
• Select “Active Faults/Alarms”
All active fault messages that have not yet been acknowledged are now displayed.
You can select each one, and press INFO to obtain more information.
You now know how to use the operator panels to set the parameters on your converter and commis-
sion it. Another option for setting the parameters is to use your PC or a SIMATIC programming device
This method is clearer and more convenient, but requires somewhat more preparation time.
OK OK
OK
Menu Diagnostics
Active Faults/Alarms
To Next Page
Loading...
