23
Mounting the IOP-2 or BOP-2 in a cabinet door
The operator panel is the input and display instrument for controlling the converter. It is used in stand-
alone operation, i.e., locally, on the device, integrated in the cabinet door or as handheld version for
series commissioning (IOP-2).
Door panel
Seal
Door mounting bracket
Screws
D-type retaining screws
Mounting the IOP-2
Identical mounting for the BOP-2
4
3
1
2
5
1
2
3
4
5
Congratulations! Your converter is now ready for operation.
After installation has been completed, the converter parameters must be set, i.e., you must
enter the specific characteristics of the connected motor into the converter.
To Next Page
Loading...
