Removing a thyristor
1. For thyristor stacks, detach the gate lead from the thyristor electronics.
① Guide bolt
② Open-ended wrench
Figure 9-8 Open-ended wrench in the groove of the guide bolt
2. Insert the open-ended wrench ② into the groove of the guide bolt ①.
③ Socket wrench
④ Clamping screw
Figure 9-9 Loosening the clamping screw with the socket wrench
Maintenance
9.7 Repairs
SINAMICS GL150 6SL38503UM114PA0Z
Operating Instructions Rev.201910301420 MUSTER 127
To Next Page
Loading...
