Siemens SINAMICS Series Function Manual

Safety information
1.1 Industrial security
Safety Integrated
10 Function Manual, 07/2016, A5E03264275A
1.1
Industrial security
Note
Industrial security
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, solutions, machines, devices, and/or networks. They are
important compon
ents in a holistic industrial security concept. With this in mind, Siemens
products and solutions undergo continuous development. Siemens recommends strongly
that you regularly check for product updates.
For the secure operation of Siemens products and sol
utions, it is necessary to take suitable
preventive action (e.g. cell protection concept) and integrate each component into a holistic,
state
-of-the-art industrial security concept. Any third-party products that may be in use must
also be taken into accoun
t. For more information about industrial security, visit Hotspot-Text
(
http://www.siemens.com/industrialsecurity).
To receive information about product updates on a regular basis, register for ou
r product
newsletter. For more information, visit Hotspot
-Text (https://support.industry.siemens.com).
WARNING
Danger due to unsafe operating states caused by software manipulation
Software manipulations (e.g. viruses, trojans, malware, worms) can cause unsafe operating
states in your system that may lead to death, serious injury, and property damage.
• Update your software regularly.
You will find relevant information and newsletters at this address
(http://www.siemens.com/industrialsecurity).
• Integrate the automation and drive components into a holistic, state-of-the-art industrial
security concept for the plant or machine.
You will find further information at this address (https://support.industry.siemens.com).
• Make sure that you include all installed products into the holistic industrial security
concept.
Note
Industrial Security Configuration Manual
You can
find a Configuration Manual on the topic of Industrial Security at this address
(
https://support.industry.siemens.com/cs/ww/en/view/108862708).

Siemens SINAMICS Series Specifications

General

Product Line	SINAMICS
Cooling Method	Air-cooled, Liquid-cooled
Voltage Range	200 V to 690 V
Power Range	0.12kW - 250kW
Communication Interfaces	PROFINET, PROFIBUS, Ethernet
Control Modes	Vector control, V/f control
Protection Class	IP20
Type	Variable Frequency Drives (VFD)