Siemens SINAMICS V20 Series - Page 200

Parameter list
7.2 Parameter list
SINAMICS V20 Inverter
200 Operating Instructions, 07/2012, A5E03728167
Parameter Function Range Factory
default
Can be
changed
Scaling Data
set
Data
type
Acc.
Level
P2202[0...2] Fixed PID setpoint 2 [%] -200.00 -
200.00
20.00 U, T - DDS Float 2
Defines fixed PID setpoint 2.
Note: See P2201
P2203[0...2] Fixed PID setpoint 3 [%] -200.00 -
200.00
50.00 U, T - DDS Float 2
Defines fixed PID setpoint 3.
Note: See P2201
P2204[0...2] Fixed PID setpoint 4 [%] -200.00 -
200.00
100.00 U, T - DDS Float 2
Defines fixed PID setpoint 4.
Note: See P2201
P2205[0...2] Fixed PID setpoint 5 [%] -200.00 -
200.00
0.00 U, T - DDS Float 2
Defines fixed PID setpoint 5.
Note: See P2201
P2206[0...2] Fixed PID setpoint 6 [%] -200.00 -
200.00
0.00 U, T - DDS Float 2
Defines fixed PID setpoint 6.
Note: See P2201
P2207[0...2] Fixed PID setpoint 7 [%] -200.00 -
200.00
0.00 U, T - DDS Float 2
Defines fixed PID setpoint 7.
Note: See P2201
P2208[0...2] Fixed PID setpoint 8 [%] -200.00 -
200.00
0.00 U, T - DDS Float 2
Defines fixed PID setpoint 8.
Note: See P2201
P2209[0...2] Fixed PID setpoint 9 [%] -200.00 -
200.00
0.00 U, T - DDS Float 2
Defines fixed PID setpoint 9.
Note: See P2201
P2210[0...2] Fixed PID setpoint 10
[%]
-200.00 -
200.00
0.00 U, T - DDS Float 2
Defines fixed PID setpoint 10.
Note: See P2201
P2211[0...2] Fixed PID setpoint 11
[%]
-200.00 -
200.00
0.00 U, T - DDS Float 2
Defines fixed PID setpoint 11.
Note: See P2201
P2212[0...2] Fixed PID setpoint 12
[%]
-200.00 -
200.00
0.00 U, T - DDS Float 2
Defines fixed PID setpoint 12.
Note: See P2201