Options and spare parts
B.1 Options
SINAMICS V20 Inverter
262 Operating Instructions, 07/2012, A5E03728167
Outline dimensions (mm)
)UDPHVL]H$VFUHHQLQJSODWHNLW
)UDPHVL]H&VFUHHQLQJSODWHNLW
)UDPHVL]H%VFUHHQLQJSODWHNLW
)UDPHVL]H'VFUHHQLQJSODWHNLW
Fixing the screening plate kit to the inverter
If the inverter applies cabinet-panel mounting mode:
Fixing to frame size A
① Loosen the PE screw and slide the screening
plate from below, then retighten the screw to 1.8
Nm (tolerance: ± 10%).
② Clamp the heatsink between the screening
plate and the cabinet panel and tighten the
screws and nuts to 1.8 Nm (tolerance: ± 10%).
③ Fold the cable screen clamp to suit the cable
diameter during inverter installation.
To Next Page
Loading...
Need help?
General