Accessories
3.10 Accessories for integration in the power distribution equipment
3WJ Air Circuit breakers
Operating Instructions, 12/2022, L1V30828903001-01
147
3. Put the insert nuts into the back side of the circuit breaker as shown in the picture below.
4. Re-install the arc chutes on the outsides of the fixed-mounted circuit breaker.
5. Fix them with 5 Nm tightening torque.
6. Put the arc chute cover on the top of the circuit breaker.
7. Fix the arc chute cover to the Circuit breaker by inserting the securing pins.
To Next Page
Loading...
