Connecting
7
7.1 Overview
Connection options
The NCU has a series of interfaces via which the power supply and the remaining system
components are connected. The front cover of the NCU must be open to make the connections.
● The various SINAMICS components are connected with the NCU via DRIVE-CLiQ.
● Actuators and sensors can be connected to the digital inputs/outputs.
● The NCUs have the following communication options:
– PROFIBUS DP, Ethernet
– PROFINET
The following overview shows an example of the various interfaces and their connection
options.
NCU 1760
Equipment Manual, 02/2020, A5E45627861B AB 49
To Next Page
Loading...
