Dimensions W x H x D
4)
50 x 432 x 272 mm
Weight (without packaging) 3.75 kg
2) If power supply units with primary-side supplies up to 600 V AC (line-to-neutral voltage) are to be used,
the transient voltages on the primary side of the power supply unit must be limited to 4000 V.
3) Connect the device only to a 24 V DC power supply that is compliant with protective extra-low voltage
(PELV) requirements according to UL 61010.
4) With dual fan module and spacers
2) Si une alimentation avec tension primaire jusqu'à 600 V CA (conducteur - point neutre) est mise en
œuvre, limiter les surtensions transitoires au primaire de l'alimentation à 4 000 V.
3) Raccorder l'appareil uniquement à une alimentation 24 V CC qui répond aux exigences de très basse
tension de protection (TBTP) selon UL 61010.
4) Avec module ventilateur double et entretoises.
10.1 Standards and approvals
Approvals
CE approval
Figure 10-1 CE marking
The operator panels and the safety-relevant accessories satisfy the requirements and
protection objectives of the following EC directives. The operator panels and the safety-
relevant accessories comply with the harmonized European standards (EN), promulgated in
the Official Journals of the European Community:
● 2004/108/EC "Electromagnetic Compatibility" (EMC directive)
● Directive 2006/42/EC of the European Parliament and Council of May 17, 2006, on
machinery, and Directive 95/16/EC (amendment)
10.2 Recycling and disposal
For environmentally friendly recycling and disposal of your old device, please contact a
company certified for the disposal of electrical and electronic waste and dispose of the device
in accordance with the regulations in your country.
Technical data
10.2 Recycling and disposal
NCU 1760
90 Equipment Manual, 02/2020, A5E45627861B AB
To Next Page
Loading...
