Table 7-12 Assignment of PROFINET interface X160 in the 10/100 MBit/s mode
Connector Pin Name Type Remark
1 DA+ B Bidirectional pair A+
2 DA- Bidirectional pair A-
3 DB+ Bidirectional pair B+
4 DC+ Bidirectional pair C+
5 DC- Bidirectional pair C-
6 DB- Bidirectional pair B-
7 DD+ Bidirectional pair D+
8 DD- Bidirectional pair D-
Shield - - On connector housing
- LED green
(Link)
- Lights up orange: 1000 Mbit/s
Off: No or faulty connection
- LED orange
(Activity)
- Flashes: Data exchange
Off: No data exchange
B = Bidirectional
Note
The PROFINET interface has what is known as autocrossing functionality, i.e. when required,
transmit and receive lines are switched over. Thus, no crossover cables are necessary.
Position of the PROFINET interface
Figure 7-5 PROFINET interface
Connecting
7.8 PROFINET
NCU 1760
68 Equipment Manual, 02/2020, A5E45627861B AB
To Next Page
Loading...
