Siemens SIPROTEC - Page 730

Appendix
A.8 Information List
SIPROTEC, 7SD5, Manual
C53000-G1176-C169-5, Release date 02.2011
730
3596 Remote signal 24 received
(Rem.Sig24recv)
Remote Signals OUT on
off
* * LED BO 93 181 1 Yes
3603 >BLOCK Distance protection
(>BLOCK Distance)
Dis. General SP * * * LED BI BO
3610 >BLOCK Z1-Trip (>BLOCK Z1-
Trip)
Dis. General SP on
off
**LEDBIBO28101Yes
3611 >ENABLE Z1B (with setted Time
Delay) (>ENABLE Z1B)
Dis. General SP on
off
**LEDBIBO28111Yes
3613 >ENABLE Z1B instantanous (w/o
T-Delay) (>ENABLE Z1Binst)
Dis. General SP on
off
**LEDBIBO28131Yes
3617 >BLOCK Z4-Trip (>BLOCK Z4-
Trip)
Dis. General SP on
off
**LEDBIBO28171Yes
3618 >BLOCK Z5-Trip (>BLOCK Z5-
Trip)
Dis. General SP on
off
**LEDBIBO28181Yes
3619 >BLOCK Z4 for ph-e loops
(>BLOCK Z4 Ph-E)
Dis. General SP on
off
**LEDBIBO28191Yes
3620 >BLOCK Z5 for ph-e loops
(>BLOCK Z5 Ph-E)
Dis. General SP on
off
**LEDBIBO28201Yes
3621 >BLOCK Z6-Trip (>BLOCK Z6-
Trip)
Dis. General SP on
off
**LEDBIBO28411Yes
3622 >BLOCK Z6 for ph-e loops
(>BLOCK Z6 Ph-E)
Dis. General SP on
off
**LEDBIBO28421Yes
3651 Distance is switched off (Dist.
OFF)
Dis. General OUT on
off
**LEDBO28511Yes
3652 Distance is BLOCKED (Dist.
BLOCK)
Dis. General OUT on
off
on off * LED BO 28 52 1 Yes
3653 Distance is ACTIVE (Dist.
ACTIVE)
Dis. General OUT * * * LED BO 28 53 1 Yes
3654 Setting error K0(Z1) or Angle
K0(Z1) (Dis.ErrorK0(Z1))
Dis. General OUT on
off
**LEDBO
3655 Setting error K0(>Z1) or Angle
K0(>Z1) (DisErrorK0(>Z1))
Dis. General OUT on
off
**LEDBO
3656 Setting error K0 or Angle K0
(Dist. Error K0)
Dis. General OUT on
off
**LEDBO
3657 Setting Warning Zone sequence
(Dist. Warn Zseq)
Dis. General OUT on
off
**LEDBO
3671 Distance PICKED UP (Dis.
PICKUP)
Dis. General OUT * off * LED BO 28 71 2 Yes
3672 Distance PICKUP L1 (Dis.Pickup
L1)
Dis. General OUT * * * LED BO 28 72 2 Yes
3673 Distance PICKUP L2 (Dis.Pickup
L2)
Dis. General OUT * * * LED BO 28 73 2 Yes
3674 Distance PICKUP L3 (Dis.Pickup
L3)
Dis. General OUT * * * LED BO 28 74 2 Yes
3675 Distance PICKUP Earth
(Dis.Pickup E)
Dis. General OUT * * * LED BO 28 75 2 Yes
3681 Distance Pickup Phase L1 (only)
(Dis.Pickup 1pL1)
Dis. General OUT * on * LED BO 28 81 2 No
3682 Distance Pickup L1E (Dis.Pickup
L1E)
Dis. General OUT * on * LED BO 28 82 2 No
3683 Distance Pickup Phase L2 (only)
(Dis.Pickup 1pL2)
Dis. General OUT * on * LED BO 28 83 2 No
3684 Distance Pickup L2E (Dis.Pickup
L2E)
Dis. General OUT * on * LED BO 28 84 2 No
3685 Distance Pickup L12 (Dis.Pickup
L12)
Dis. General OUT * on * LED BO 28 85 2 No
No. Description Function Type
of In-
for-
matio
n
Log Buffers Configurable in Matrix IEC 60870-5-103
Event Log ON/OFF
Trip (Fault) Log On/Off
Ground Fault Log ON/OFF
Marked in Oscill. Record
LED
Binary Input
Function Key
Relay
Chatter Suppression
Type
Information Number
Data Unit
General Interrogation