SITRANS F M MAGFLO
®®
®®
®
29
SFIDK.PS.026.E5.02
ENGLISH
Limit/direction
Limit switches are available for both digital as well as relay output.
Direction mode: 1 set point at 0% flow; hysteresis 5%.
If 2 set points must activate 2 separate outputs, a single set point has to be selected individually
for digital as well as relay outputs.
Batch
5.4.3
Relay outputs
Cleaning
! Cleaning not possible
with MAG 6000 I.
5.4.4
External input
The relay output must always be used to operate the cleaning unit when a cleaning unit has been
installed together with the transmitter. The relay output cannot be used for other purposes.
Note
When batch function is on relay - the pulse/frequency output is not possible.
5. Commissioning
To Next Page
Loading...
