Siemens sitrans PROBE LU - FISCO Concept for Intrinsically Safe Systems; FM;CSA Requirements

Page 98 SITRANS Probe LU (PROFIBUS PA) – INSTRUCTION MANUAL 7ML19985JB02
mmmmm
H: Parameters
3.1.6. Process Value Scale
3.1.6.1. Lower Value (default 0)
Defines the operational lower range value of the input value (Process
Value Scale) in engineering units. Process Value Scale normalizes the
input value to a customer-defined range.
3.1.6.2. Upper Value (default 100)
Defines the operational upper range value of the input value (Process
Value Scale) in engineering units. Process Value Scale normalizes the
input value to a customer-defined range.
3.1.7. Output Scale
Scales the Process Variable. The function block parameter OUT SCALE
contains the values of the lower limit and upper limit effective range.
3.1.7.1. Lower Value (default 0)
Defines the operational lower range value of the output value in
engineering units.
3.1.7.2. Upper Value (default 100)
Defines the operational upper range value of the output value in
engineering units.
3.1.8. Output Limits
3.1.8.1. Lower Limit Alarm
The setting for the lower alarm limit in engineering units.
3.1.8.2. Lower Limit Warning
The setting for the lower warning limit in engineering units.
3.1.8.3. Upper Limit Warning
The setting for the upper warning limit in engineering units.
3.1.8.4. Upper Limit Alarm
The setting for the upper alarm limit in engineering units
0
1
2
3
4
5
6
12345
Process Value Scale (typical)
Input (0 to 100%)
Output Scale
Out (AIFB1 or AIFB2 Out)