Planning the examination range
The examination range should be planned on a topogram to cover
the desired anatomic region for diagnosis.
1 In Chronicle, select the desired scan step (for example,
AbdRoutine).
2 To move the examination range, click in the center of the range
and drag the range box to the required position.
3 To change the scan length, click the upper or lower handle of the
range and move the handle to the required position.
5.2
Performing an examination 5
SOMATOM Scope |
syngo
CT VC50
Print No. HC-C2-015-G.626.08.01.02
37
To Next Page
Loading...
