2 Select 3D as the Recon job type on the Recon sub-task card.
The 3D recon segments appear. Each 3D recon segment shows one
plane of the scanned image volume. By default, the following
views are shown from left to right:
• Coronal view
• Axial view
• Sagittal view
3 In the Recon axis list, select the axis for 3D recon (for example,
coronal).
The first segment (in the coronal view) is marked as the FoV
segment; coronal images will be reconstructed.
5
Performing an examination
44 Quick Guide
Print No. HC-C2-015-G.626.08.01.02
To Next Page
Loading...
