20
Siemens Building Technologies / HVAC Products CE1B3131x2-en 74 319 0346 0 a 19.11.2004
Do you want to enter holiday periods?
You can enter a total of 16 holiday periods and special
days (see next section). During a holiday period, there is
no heating program active but only the same room
operating mode.
Date
On the submenus Entry 1, Entry 2, Entry 3 , etc., you need
to enter for each holiday period:
• Menu option Start: The date, year and time of day of
the first day of the holiday period
• Menu option End: The date, year and time of day of
the last day of the holiday period
• Menu option Reason: The holidays
Every entry can be deleted (menu option Cancel entry).
Room operating mode
Enter the required room operating mode with menu
option Holidays-room operating mode. Available are Econ-
omy
or Protection . The entry will apply to all holiday
periods.
DHW heating
If your controller also controls DHW heating, you need to
enter the required operating mode. You find it with menu
option DHW optg mod holid.
The following operating modes are available:
Automatic
Normal
Reduced
Protection
Path:
Main menu > Holidays/special days > Calendar > Entry …
Path:
Main menu > Holidays/special days > Rm optg mode holid … > DHW optm mode holid
Before making entries, prepare a yearly time schedule for all holiday periods!
To Next Page
Loading...
