Sierra Wireless Overdrive - System Events

110 Settings
System Events
You can enable or disable, as a group, the logging of the following events:
● Sof
tware update available
● Network update
available
● Primary W
AN failover
● Primary W
AN switchback
● Une
xpected data connection loss
● Changes to
miscellaneous settings
The following system events are always logged:
● In
trusion alerts
● Une
xpected power loss
● Critical bat
tery
● Critical temper
ature
● R
outing hardware settings reset
● Firmwar
e update
Enabling and Disabling Logging of System Events
1. Log in to the home page.
2. Click Advanced settings > Device > Log.
3. In the System Events section, select Enable or Disable.
4. Click save.
Note: Certain events are always logged; see “System Events” (above).
Exporting System Events
1.
Log in to the home page.
2. Click Advanced settings > Device > Log.
3. Ensure System Events is set to Enable.
4. Click Export.
Clearing the System Events Log
1.
Log in to the home page.
2. Click Advanced settings > Device > Log.
3. Ensure System Events is set to Enable.
4. Click Clear log.