Sify SMAC Series - Wireless Security Settings

SMAC User Manual
Sify Technologies Limited, 2011 © Copyright Protected Page 22
Channel HT Mode
Automatically detect the change when changed on Outdoor base
Channel / Frequency
Automatically detect the change when changed on Outdoor base
Accept / Cancel
Press Accept to confirm the changes or Cancel to return previous
settings.
Current Profile
Configure the SSID, it can help to divide group of clients to access
the network .Just Edit to configure the profile.
Accept does not compile the changes, you must go to Status -> Save/Load to apply the new
settings. Please refer to the chapter 4.1 for more detail.
5.2 Wireless Security Settings
Wireless Security Settings section will guide you to the entire Security mode configuration:
We strongly recommend that WPA2-PSK as your security settings.
For Outdoor Base:
Under Wireless  Click wireless Network
Security Mode
Select Enabled from the drop down list to begin the configuration.