SMAC User Manual
Sify Technologies Limited, 2011 © Copyright Protected Page 24
ACL Mode can help to deny or allow certain Client to access the
network. Select Disable Deny MAC in the list or Allow MAC in the
list from the drop down list.
Specify the Wireless MAC address manually.
Press Add to add the Wireless MAC address in the table.
Press Apply to apply the changes.
5.4 Wireless Advanced Settings
Under Wireless Click Wireless Advanced Settings
Select Data Rate from the drop down list. Data rate will affect the
efficiency of the throughput. If the data rate is set to a small
number, the lower through will get but it can transmit to longer
distance.
To Next Page