Sify SMAC Series - RIP (Routing Information Protocol)

SMAC User Manual
Sify Technologies Limited, 2011 © Copyright Protected Page 36
Destination
Specify the Destination IP address.
Mask
Specify the Destination Mask.
Next Hop
Specify the next hop IP address.
Metric
Specify the metric value if required.
Note
All the filter related changes will take effect immediately after
clicking on ‘accept’ tab. Maximum it can support 100 routes in static
routing mode.
9.0.2 RIP (Routing Information Protocol)
Check the dialogue box of RIP option for enabling the static routing function. Static
dialogue box has to be unchecked.