Sify SMAC Series - Secondary Server; Radius Settings

SMAC User Manual
Sify Technologies Limited, 2011 © Copyright Protected Page 30
7.0.2 Secondary Server
This configuration is used to specify the primary radius server IP address.
Request timeout
Specify the secondary server IP (Data Type: IP address).
Secondary server port
Specify the secondary server ort (Data Type: Integer, range 1 –
65535)
Secondary shared server
secret
Specify the secondary secret (Data Type: String)
7.0.3 Radius settings
Re-authentication time
Specify the number of seconds after which the SU is re-
authenticated in case of successful/unsuccessful authentications.
Data Type: Integer (default 300 seconds)
Retry Time
Specify the number of seconds after which an attempt will be made
to reach the primary and secondary server. AP will not forward any
request to primary and secondary server for the time duration
configured in retry time.
Data Type: Integer (default 300 seconds)
Retry count
Specify the number of times Radius Client should try to connect to
the Radius Server before giving up.
Data Type: Integer (default 3 times)
Request count period
Specify the time gap between two requests retries.
Data Type: Integer (default 3 seconds)