Sigma 4-15C - Page 20

Operating Manual SIGMA 4-15C, page 20 of 95
03/06
Part No. Description Max. speed
(rpm)
Max.
gravitational
field (x g)
11144 Swing-out rotor for microtiter plates, incl.
2 buckets 13145 and plate holder 17977,
radius edge 12.85 cm,
radius max. 10.7 cm
radius min. 6.3 cm,
max. plate height 64 mm
5 000 3 592
2 991
1 761
11118 Swing-out rotor for microtiter plates, incl.
2 buckets 13218 and plate holder 17978,
radius edge 15.15 cm,
radius max. 13.8 cm
radius min. 5.8 cm,
max. plate height 80 mm,
buckets sealable with cap 17108
5 500 5 124
4 667
1 961
17108 Rectangular sealing cap, polysulfone, clear,
incl. 4 clips 17118, for bucket 13218
17978 Plate holder for bucket 13218
12165 Angle rotor 6 x 78-85 ml for sealed tubes,
e.g. 13085 plus 17185, 15074, 15075, 15076,
15080, incl. hermetic aluminium lid, max.
radius 9.8 cm, min. radius 2.7 cm, angle 25° 12 500 17 119
12166 Angle rotor 8 x 40-50 ml for sealed tubes,
e.g. 13055 plus 17054, 15051, 15052, 15054,
incl. hermetic aluminium lid, max. radius
9.6 cm, min. radius 3.3 cm, angle 25° 12 500 16 770
12172 Angle rotor 12 x 27-30 ml for sealed tubes,
e.g. 15029, 15030, 15032, incl. hermetic
aluminium lid, max. radius 11.0 cm, min.
radius 5.1 cm, angle 30° 12 500 19 216
12168 Angle rotor 20 x 10-12 ml for sealed tubes,
e.g. 13026 plus 17126, 15000, 15010, 15039,
incl. hermetic aluminium lid, max. radius
9.8 cm, min. radius 5.8 cm, angle 25° 12 500 17 119
12130 Angle rotor 30 x 1.5-2.2 ml for reaction
vials, e.g. 15008, 15040, incl. hermetic
aluminium lid, max. radius 10.0 cm, min.
radius 6.7 cm, angle 45° 13 500 20 376