Operating Manual SIGMA 4-15C, page 27 of 95
03/06
Part No.
Description
16031 Rubber adapter for 30 ml glass tube 15033,
suitable for 12165
16906 Rubber plate for 18025
16907 ditto, only for 18050
16908
ditto, only for 18100
16909 Rubber plate for rectangular carriers
16250 Rubber cushion for 13201
17112 Rectangular polysulfone sealing cap, clear,
incl. 2 clips 17118, for 13215 and spare for
13127
17118 Sealing clip for caps 17108, 17112
17801 Lid for rotor 12256
17919 Table for centrifuge made of varnished
sheet steel with 2 doors and space for
accessories, movable on lock-type castors,
dimensions: w 490, d 635, h 490 mm
17913 Fasteners for table 17919
Further accessories are available on request.
Maximum speed for tubes
Some tubes, e.g. centrifuges glass tubes, microtubes, culture tubes, Teflon tubes and
especially high volume tubes can be used in our rotors, buckets and adapters at
higher speeds than their breaking limit. We recommend to always fill up the tubes and
to follow the recommendations of the manufacturer.
To Next Page
Loading...
