Operating Manual SIGMA 4-15C, page 7 of 95
03/06
General Information
1.1 Technical data
1.2 Suitable accessories
1.3 Scope of supply
1.4 Standards and regulations
1.5 Safety instructions
1.6 Symbol table
Description of the Centrifuge
2.1 General outlay
2.2 Construction and constructive safety measures
2.3 Drive
2.4 Operation and display
2.5 Electronic control
2.6 Safety devices
2.6.1 Lid lock, cover closing device
2.6.2 Imbalance monitoring system
2.6.3 Rotor monitoring
2.6.4 Standstill monitoring
2.6.5 System check
2.6.6 Ground wire check
Installation and Start-up
3.1 Unpacking of the centrifuge
3.1.1 Transport safety device
3.2 Installation
3.2.1 Site
3.2.2 Connection/Fuse
3.2.3 Fuses / emergency circuit breaker on site
3.3 Installation of rotors and accessories
3.3.1 Fastening of angle rotors with hermetically sealed lid
3.4 Initial start-up
3.4.1 Switching on of the centrifuge
3.4.2 Opening lid
3.4.3 Installation of a rotor
To Next Page
Loading...
