Sigma 4-15C - Scope of Supply; Standards and Regulations

Operating Manual SIGMA 4-15C, page 29 of 95
03/06
1.3 Scope of Supply
The following belongs to the centrifuge:
1 Rotor wrench SW 13 Part No. 930 102
1 Square wrench “Emergency lid release“ Part No. 80 054
1 Tube grease for rotor trunnion pins Part No. 70 284
20 ml slushing oil Part No. 70 104
Documentation:
1 Short operating instructions
1 Operating Manual
1 "Rotor and Accessories, Operation and Use"
1 EU-Statement of Conformity
1 Equipment Decontamination Certificate
Accessories according to your order, our order confirmation and our delivery
note.
Rotor Part No. Rotor No.
....................... .....................
....................... .....................
....................... .....................
....................... .....................
....................... .....................
....................... .....................
....................... .....................
1.4 Standards and Regulations
Please refer to the enclosed EU-Statement of Conformity.