Sigma 4-15C - Care and Maintenance

Operating Manual SIGMA 4-15C, page 9 of 95
03/06
Notes for Centrifugation
7.1 Practical notes for centrifugation
7.2 Forbidden centrifuging operations
Care and Maintenance
8.1 Care and cleaning of centrifuge
8.2 Care and cleaning of accessories
8.3 Rotor pins
8.4 Glass breakage
8.5 not applicable
8.6 Sterilization and disinfection of rotor chamber and accessories
8.6.1 Autoclaving
8.7 Checks by operator
Appendix
9.1 Slope of the specified curves, linear curves
9.2 Quadratic curves
9.3 Entry limitations
9.4 Mathematical relations
9.4.1 Relative Centrifugal Force (RCF)
9.4.2 Density
9.5 Error correction
9.5.1 Centrifuge cannot be started
9.5.2 Centrifuge decelerates during operation
9.5.3 Lid cannot be opened/closed
9.5.4 Emergency lid release
9.5.5 Problems with the centrifuge?
9.6 Error codes
9.7 Speed-RCF-diagram
9.8 Declaration of decontamination/Return declaration
9.9 Form program data
9.10 Leaflet